Viscometer, Sine-Wave Vibro for Newtonian Fluids, Model SV-10, 0.3 cP to 10,000 cP

92-2543-01Sine-Wave Vibro Viscometer, 0.3~10000mPas, A&D Model SV-10

Newly developed Tunig-Fork Vibration method promises you hugh accuracy and a wide measurement range without replacing the sensor plates  Sine-wave Vibro Viscometer SV series measures viscosity by detecting the driving electric current necessary to resonate the two sensor plates at a constant frequency of 30Hz and amplitude of less than 1mm.  Samples with very low viscosity to very high viscosity can be measured without changing the sensor plates, so a wide range of measurements can be made continuously with a repeatability of 1% of reading.
          Temperature Measurement - It is very important to measure the temperature of the fluid correctly because the viscosity is very much dependent upon the temperature of the fluid.  The SV series can detect accurate temperature immediately because the fluid sample and the detection unit (sensor plates) with small surface area/thermal capacity reach thermal equilibrium in only a few seconds.
           Real-Time Measurement - The SV series sensor plate is very thin and small, both in area and in mass, which means that the sample is not adversely affected by temperature change.  As a result, a stable viscosity measurement can be monitored in real-time.
            Continuous Measurement - The SV series Tuning-Fork Vibration Method does not disturb the sample fluid and allows measurement of cloud point of samples such as surface active agents, and of surface/interface changes such as wettability due to its ability to measure a wide range without the need to replace the sensor plates.
Measurement Method
Tuning Fork Vibration Method
Natural Frequency at 30Hz
Viscosity Measurement Unit
Viscosity Measurement Range
1% of Reading (S.D., 20 - 30°C, No condensation)
Minimum Sample Amount
Standard Sample Cup(35-45ml), Optional Sample Cup(10ml), Optional Glass Sample Cup(13ml)
Temperature Measurement
0~160°C / 0.1°C (32~320°F/0.1°F)
Vacuum Fluorescent Display (VFD)
Power Supply
AC Adaptor (Approx. 14VA)
External Dimensions / Mass
Main Unit: 322 (W)x314 (D)x536 (H) mm / Approx. 5.0kg
Display Unit: 238 (W)x132 (D)x170 (H) mm / Approx. 1.3kg
Standard Accessories
Manual, AC Adapter, CD-ROM (WinCT-Viscosity), Sample Cups, RS-232C Cable(25pin - 9pin)


Catalog # Product Description
92-2543-01Sine-Wave Vibro Viscometer, 0.3~10000mPas, A&D Model SV-10 $3,605.00
Add a customer note to this item (Question, Reference Number, Etc.)
300 characters remaining
Keyword/Catalog #:

Items in your Cart: 0  

Current Subtotal:$0.00

Checkout Button

Coal/Coke Laboratory

Water Testing

General Laboratory


Request a Quote

Request a Catalog

Catalog #/Cross Reference




ISO Certificate

Certificate of Analysis