|
|
91-7050-01 Pulverizer, Model 350A1-BS, Manual Feed 115/1/60Hz
Holmes #350A1-BS, Pulverizer, 6x2, 1HP
Holmes Model 350 is a laboratory bench-type sample pulverizer that has a capacity of 400 grams of coal per minute using a 0.024” diameter perforated screen. It is recommended for pulverizing 4-mesh and smaller material to minus-60 mesh.
Features
- The 60-cubic inch (980 cm³) capacity, manual-feed hopper has a vinyl snap-on cover.
- The interior of the pulverizing chamber is completely machined and sealed.
- A quick-opening latch provides easy access to the pulverizing chamber and interrupts the power to the motor when the door is open.
- The one-piece, dynamically balanced rotor is easily leaned.
- Screen plates are circles with the loose ends held by two lock pins that extend into the pulverizing chamber. Available perforation diameters are (in inches) 0.020, 0.024, 0.033, 0.040, 0.0625, and 0.093.
- Also available are 0.010 X 17/32 inch slots.
- A one HP, 12 amp, 115 volt, single phase, 60Hz open motor turns the rotor at about 10,000 rpm.
- A Nema-1 starting switch provides overload protection. The open-door sensor cuts power until the reset (stop) button is actuated.
- Overall Size: 21 1/2”H x 18”W x 22”D; Shipping Weight: 100 lb
- The lightweight steel base is mounted on four rubber pads.
Supplied with
- Five screen plates.
- About 10 feet of cable to connect to the power source.
Additional Information
Manual
 PDF 115kb
| Catalog # |
Product Description |
|
Price |
|
91-7050-01
|
Holmes #350A1-BS, Pulverizer, 6x2, 1HP
|
By Quote Only
|
|
|
|